DRH-300導熱系數測試儀（護熱平板法,單平板）

DRH-300導熱系數測試儀（護熱平板法,單平板）

該儀器基于單向穩定導熱原理，當試樣上、下兩面處于不同的穩定溫度下，測量通過試樣有效傳熱面積的熱流及試樣兩表面間溫差和厚度，計算導熱系數。滿足了材料檢測研究部門對材料導熱系數的高精度測試要求。儀器參考標準：GB/T3399《塑料導熱系數試驗方法，護熱平板法》、GB/T3139-2005（纖維增強塑料導熱系數試驗方法）(玻璃鋼導熱系數試驗方法)、GB/10294-2008（絕熱材料穩態熱阻及有關特性的測定 防護熱板法）等。主要測試塑料、玻璃、纖維、泡沫、保溫材料等。廣泛應用在大中院校，科研單位，質檢部門和生產廠的材料分析檢測。

DRH-300導熱系數測試儀（護熱平板法,單平板）主要技術指標：

1、導熱系數范圍：0.001～2.000W/mk；

2、測試精度：±3％；

3、試樣尺寸：單試件300×300×(10-50)mm；平面度： < 0.05 mm.

4、熱面溫度范圍：室溫～100℃，溫度分辯率0.01℃,測量精度： 0.05℃；

5、冷面溫度范圍：0～60℃，溫度分辯率0.01℃；

6、計算機控制全自動測試；

7、冷熱板溫差：默認值20℃，用戶也可以自行設定

常用標準溫差: 20℃ 常用溫度差范圍15-25℃

8、使用電源：230V，60HZ。

配置：含測試主機壹臺，軟件壹套，高精度恒溫水槽壹臺，帶英文操作系統的臺式電腦壹臺。

DRH-300 Coefficient of thermal conductivity tester（The protecting-hot plate method）

1.Overview:

The instrument is based on one-way steady heat conduction principle, When the upside and downside of the sample in different stable temperature, measured by the specimen effective heat transfer area of heat flux 、the temperature that is difference between the upside and downside and it thickness to calculate it coefficient of thermal conductivity. Material coefficient of thermal conductivity of the material testing research department of high precision testing requirements. Instruments and reference standards: GB/T3392-82 "plastic test method for thermal conductivity, thermal protection act of tablet, GB/T3139-2005 (fiber reinforced plastic coefficient of thermal conductivity test method) (glass fiber reinforced plastic coefficient of thermal conductivity test method), GB/T10294 (insulation steady state thermal resistance and the relevant features and protection hot plate method), etc. Mainly test to plastic, glass, fiber, foam, heat preservation material etc.The machine is widely used in university and collage, scientific research institutions, quality inspection department and material analysis of factory inspection.

2.the main technical performance

1, scope of application

This instrument is suitable for the dry or homogeneous plate materials under different humidity condition and the coefficient of thermal conductivity of powder materials.

Coefficient of thermal conductivity range: 0.001 ~ 2 w/m. k

2, instrument provides the controlled temperature to test, the highest temperature is 100 ℃; Using waterbath ,temperature control range 0-60 ℃;

3,Digital temperature measuring . precision of better than 0.2.

4, power supply: 230 v / 60 hz

5, the measurement accuracy + / - 3%

6, metering heating power 35 w + / - 1%.

7, can connect PC to automatic test, and can print it data .

8, sample size requirements: 300 x 300 x (10 to 50) (mm) single sample

9, work conditions,

(1) 10 ° ~ 35 ℃ ambient temperature

(2) the relative humidity of 80% RH or less

3, instrument device introduce

   Instrument consist of stable power supply, thermometer table, center of hot plate heater, hot plate heater, upper and lower polar plate, temperature measuring element, cwaterbath, computer testing system.

    1, measuring head part, hot plate, cold plate and protecting-hot plate.

    2, heating system, hot plate temperature heater and measuring power heater.

    3, cold plate temperature control: constant temperature water tank

    4, temperature measurement and control system: Take number shows instrument to ensure the accuracy and stability, and achieve zero internal compensation.

    5, measuring power by constant heating, and digital display, the accuracy is better than 0.1%.

6, computer test components, including, a set of computer and communication components and software.

Form a complete set of products

1, test host  1SET；

2, high-precision constant temperature water tank controller  1SET；

3, computer   1SET；

4, test software   1SET；

5, specification   1SET；

6, temperature controller, power supply specifications  1SET；